EAG-2 Environmentally acceptable Grease
Environmentally Acceptable Lubricant designed for use in Wire Rope applications
Viper EAG-2 Environmentally Acceptable Lubricant (EAL) is an environmentally friendly, synthetic, high-performance lubricant designed for Wire Rope Applications. While many EAL lubricants sacrifice performance and durability to meet regulatory requirements, Viper WRL’s EAG-2 delivers uncompromised protection for all lubricated components.
EAG-2 is the premium choice for operators who need outstanding equipment protection while meeting demanding environmental requirements. Designed for use in environmentally sensitive areas, EAG-2 is ideal for industries such as marine, mining, ports, rail, construction and heavy industrial operations where lubricant leakage or wash-off may impact surrounding ecosystems. The advanced synthetic formula, combining renewable base oils with calcium sulfonate complex thickener, is biodegradable, non-toxic, and non-bioaccumulative.
This environmentally responsible design allows operators to reduce environmental risk without sacrificing lubrication performance or equipment reliability. This is especially critical for wire ropes in harsh marine environments where equipment is exposed to wet and highly corrosive conditions.
EAG-2 delivers exceptional extreme-pressure protection, outstanding anti-wear performance, and a wide operating temperature range. It also provides excellent rust and corrosion protection and outstanding resistance to water washout.
Why use EAG-2 to lubricate your wire rope
- Strong extreme pressure and anti-wear protection and high load-carrying capacity
- Excellent mechanical stability: Resists shearing and loss of consistency after prolonged rolling and working of the grease.
- Outstanding resistance to water washout: Stays in place and resists displacement by water immersion, critical in harsh marine and wet environments where grease loss can quickly lead to wear and unplanned downtime.
- Exceptional corrosion and rust protection: Helps prevent internal damage to equipment from chemical attack.
- High thermal and oxidative stability: Supports longer service life and cleaner systems.
- Wide operating temperature range – Helps equipment run reliably in both hot and cold conditions.
- Eco-friendly: Readily biodegradable grease with low toxicity to aquatic organisms, formulated with renewable raw materials. Contains no MOSH or MOAH.
Recommendations
- Formulated to be used with the Viper Wire Rope Lubricator
- Biodegradable and environmentally responsible formulation
- Operating Range: -40deg C to 177deg C (-40f to 350f)
- Superior rust and corrosion protection
- Long service life in wet, aggresive environments
Typical Applications
Designed for use in all Viper Wire Rope Lubrication applications, across all industries, including:- Marine equipment in offshore and inland applications
- Shiploaders and other Port applications
- Construction and mining mobile and stationary equipment
- Oil and Gas
- Waste water treatment facilities
- Steel mills and other metal foundries
- Power generation
Certifications
- EAL (Environmentally Acceptable Lubricant)
- US EPA VGP (2013) and VIDA
Technical Data
- NLGI Grade
- Colour
- Thickener Type
- Worked 60 Penetration ASTM D217
- Viscosity @ 100°C, cSt ASTM D445
- Viscosity @ 40°C, cSt ASTM D445
- Viscosity Index ASTM D2270
- Dropping Point °C (°F) ASTM D2265
- Oil Separation 24 hrs @ 25°C, 1.75 kPa (0.25 psi), % bleed, ASTM D1742
- Oil Separation 30 hrs @ 100°C, % bleed, ASTM D6184
- Water Washout @ 79°C, % ASTM D1264
- Roll Stability Dry % ASTM D1831
- Roll Stability Water % ASTM D8022
- Rust Test Emcor 3% NaCI, ASTM D6138
- Rust Test Emcor 100% Syn. Sea Water, ASTM D6138
- Corrosion Prevention DI H2O, ASTM D1743
- Corrosion Prevention Sea H2O, ASTM D5969
- Copper Corrosion 24 hrs @ 100°C, ASTM D4048
- Elastomer Comp SRE-NBR, Volume %, ASTM D4289
- Elastomer Comp SRE-NBR, Hardness %, ASTM D4289
- Fretting Wear Protection mg ASTM D4170
- Four-Ball Wear @ 75°C, 1,200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D2266
- Four-Ball EP Weld Point kgf, ASTM D2596
- Four-Ball EP Load Wear Index kgf, ASTM D2596
- Timken OK Load lbs, ASTM D2509
- SRV-EP 80°C, 1 mm Stroke, 50 Hz Frequency, Ball on Disc, Max. load w/o seizure, N, ASTM D5706
- Useful Temperature Range °C (°F)
EAG-2 Lubricant
- 2
- Beige
- Calcium Sulfonate
- 265
- 16.4
- 103
- 173
- >300 (>572)
- <1.3
- <4.8
- <1.5
- 1.90%
- 1.19%
- 0, 0
- 0, 1
- Pass
- Pass
- 1A
- +2
- -1
- <10
- <0.45
- 620
- 105
- >75
- 1,300
- -40 to 177 (-40 to 350)